|
The Q-TV2 System uses ‘BMR’ (Balanced Mode Radiator) loudspeaker drivers which not only give exceptional sound performance but also have very wide dispersion. This means, wherever you sit in your listening room, you’ll still enjoy the full hi-fi or home cinema experience. Additionally, because the advanced BMR drive units we employ are extremely narrow, (HARP drivers - high aspect ratio panel, only 131mm x 29mm), we have been able to make the whole Q-TV2 System incredibly slim. The subwoofer is a mere 38mm deep and easily hidden when mounted on the rear of the TV screen.
The Q-TV2 will fit any flat screen 30” to 42” (from January 2010 a version for screens up to 50” will be available, the Q-TV2X. This unit will be identical to Q-TV2, but with longer satellite arms to match the width of wider screens). The Q-TV2 is attached very simply, using the two vertical mounting rails supplied. The Q-TV2 bolts to the ‘VESA’ holes in the rear of your screen. This takes only a few minutes and then you’re ready to plug-in and listen to wonderful, hi-fi quality sound. The simplest way is to take an output from the TV screen’s headphone socket to Q-TV2. In this way, Q-TV2 is seamlessly controlled from the standard TV remote control and virtually invisible in use. If there is no headphone output, then use the line-out or optical output from the TV. When connected in this way, volume is controlled by Q-TV2’s own remote handset.
An optional wall bracket is available. This holds both the screen and Q-TV2 flat to the wall. The wall to screen depth is kept to a minimum. Additionally, this wall bracket can be attached to a cantilever bracket, enabling both screen and speaker system to be angled towards your preferred viewing position.
|